NYMPH Pendant – NYM-PND

LUMINAIRE TYPE: NYMPH pendant            DESIGN: ALEXANDRA TSOUKALA

The package contains:

1) The luminaire, consisting of 2 parts

2) 2 screws M4 (To connect the two parts of the luminaire)

3) 4 fabrics

USER’S AND INSTALLATION INSTRUCTION ONLY BY QUALIFIED PERSON
Cut the plastic fasteners to free the 2 parts of the luminaire.

1) Lay down with care the 2 parts of the luminaire.

2) Connect the 2 parts using the 2 screws M4.

3) Raise in the upright position the luminaire and hang it.

4) Place 3 energy saving lamps (E27 12W) in the lamp holders.

5) Place the luminaire in an upright position.

Placement of fabrics: The fabrics are not identical, and each one has an indication for insertion into the metal circle. Each fabric has a different ribbon color. Start with the bottom fabric No.1 in brown (see sketch). Then proceed with No.2 in purple, No.3 in red above that, and the tallest one No.4 in green.

6) Connect the luminaire to the circuit.

NOTES:

a)the fabrics are not the same.

b) The “entrance point holes” for inserting the wire circles are clearly marked on each one of them.

Lamp Replacement

1) Switch off the luminaire

2) Replace the lamp. USE ONLY Energy Saving Lamps E27 20W.

Cleaning

1) Switch off the luminaire.

2) Remove and wash the fabrics by hand, with cold water and soap. Avoid crimping the plastic stiffener. Alternatively dry-cleaning.

3) After drying, follow the step 5 procedure to dress the luminaire with the fabric.

Technical Information

Supply: 230V AC 50 Hz
Protection: IP 20
Lamps: Ε27, 12W, 2700Κ, 1000lm
Fabric: Satin Polyester

Warning

THIS LUMINAIRE IS NOT SUITABLE FOR INTERCONNECTION WITH OTHER LUMINAIRES.

FOR INDOOR USE ONLY.

IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, THE MANUFACTURER OR HIS SERVICE AGENT OR A QUALIFIED PERSON SHALL EXCLUSIVELY REPLACE IT IN ORDER TO AVOID HAZARD.