GENIE Floor Lamp – GEN-FL

LUMINAIRE TYPE: GENIE FLOOR    DESIGN: ALEXANDRA TSOUKALA

The package contains:

1) The luminaire, consisting of 2 parts

2) 3 screws M4. (For connecting the two parts of the luminaire)

3) One fabric

USER’S AND INSTALLATION INSTRUCTION

Cut the plastic fasteners to free the 2 parts of the luminaire.

1)Lay down with care the 2 parts of the luminair.

2)Connect the 2 parts using the 2 screws M4.

3) Raise in the upright position the luminaire.

4) Place 2 energy saving lamps (E27 12W) in the lamp holders.

5)a) Place the fabric (see sketch).
b) Next step is to clip the fabric (see sketch).
c) Raise the buttonhole and fasten it to the button.

6) Connect the luminaire’s plug in a main’s socket outlet.

7) Use the floor switch to turn on the luminaire.

Lamp Replacement

1) Unplug the luminaire

2) Raise the fabric and replace the lamp. USE ONLY Energy Saving Lamp E27 12W.

Cleaning

1) Unplug the luminaire.

2) Remove and wash the fabric by hand, with cold water and soap.
Alternatively dry-cleaning.

3) After drying, follow the step 6 procedure to dress the luminaire with the fabric.

Technical Information

• Supply: 230V AC 50 Hz, Max 2X 20W
• Protection: IP 20
• Lamps: E27 2700K 100lm
• Fabric: | Satin Polyester

Warning

• THIS LUMINAIRE IS NOT SUITABLE FOR INTERCONNECTION WITH OTHER LUMINAIRES.
• FOR INDOOR USE ONLY.
• IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, THE MANUFACTURER OR HIS SERVICE AGENT OR A QUALIFIED PERSON SHALL EXCLUSIVELY REPLACE IT IN ORDER TO AVOID HAZARD.