GEN GENIE Pendant – GEN-G-PND

LUMINAIRE TYPE: GEN-GENIE PENDANT DESIGN: ALEXANDRA TSOUKALA

The package contains:

1) The luminaire, consisting of 2 parts.

2) 4 screws M4. (to connect the two parts of the luminaire).

3) 2 fabrica.

USER’S AND INSTALLATION INSTRUCTION

Cut the plastic fasteners to free the 2 parts of the luminaire.

1) Lay down with care the 2 parts of the luminaire.

2) Connect the 2 parts using the 4 screws M4.

3) Raise in the upright position the luminaire and hang it.

4) Place 3 lamps E27, 12W in the lamp holders.

5) a) Place the fabric, first start with the bottom fabric. (see sketch).

5) b) Next step is to clip the fabric (see sketch).

5) c) Raise the button hole and fasten it to the button, (see photo).

5) d) Continue with the upper fabric.

Lamp Replacement

1) Unplug the luminaire.

2) Raise the fabric and replace the lamps with E27, 12W.

Cleaning

a) Unplug the luminaire.

b) Remove and wash the fabric by hand, with cold water and soap. Alternatively dry-cleaning.

c) After drying, follow the step 3 procedure to dress the luminaire with the fabric.

Technical information

Supply: 230V AC 50 Hz Protection: IP 20

Lampa: E27, 12W, 2700K, 1000m

Fabric: Satin Polyester

Warming

THIS LUMINAIRE IS NOT SUITABLE FOR INTERCONNECTION WITH OTHER LUMINAIRES FOR INDOOR USE ONLY.

IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, THE MANUFACTURER OR HIS SERVICE AGENT OR A QUALIFIED PERSON SHALL EXCLUSIVELY REPLACE IT TIN ORDER TO AVOID HAZARD.