MARILYN Pendant – MAR-PND

minimum design   

design Alexandra Tsoukala

LUMINAIRE TYPE: MARILYN Pendant

The package contains:
1) The luminaire
2) 6 spokes
3) Plastic rings.

USER’S AND INSTALLATION INSTRUCTION (ONLY BY QUALIFIED PERSON).

Cut the plastic fasteners to free the luminaire
1) Hang the luminaire.
2) Lift the fabric (if pedant luminair hang it)
3) Place the spokes (see sketch)
4) Fix the fabric using the plastic rings
5) Connect to the circuit

Lamp Replacement
1) Switch of the luminaire
2) Replace the lamp.
USE ONLY Energy Saving Lamp E27 20W.

Cleaning
1) Switch of the luminaire.
2) Remove the plastic rings at the end of the spokes in order to lift the fabric.
3) Remove the 6 spokes.
4) Loosen the hexagonal nut on the top of the luminaire and lift the chromium-plated disk so you can remove the fabric.
5) Wash the fabric by hand, with cold water and soap.
Alternatively dry cleaning.
6) After drying, follow the reverse procedure to dress the luminaire with the fabric

Technical Information:
-Supply: 230V AC 50 Hz, Max 20W.
-Protection: IP 20
-Lamp: Use Energy Saving Lamp E27 20W.
-Fabric: Satin Polyester.

Warning
-THIS LUMINAIRE IS NOT SUITABLE FOR INTERCONNECTION WITH OTHER LUMINAIRES
-FOR INDOOR USE ONLY
-IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLU-SIVELY REPLACED BY THE MANUFACTURER OR HIS       SERVICE AGENT OR A QUALIFIED PERSON IN ORDER TO AVOID HAZARD.