CHARLESTON Floor Lamp – CHR-FL

EN
Luminaire type: CHARLESTON FLOOR                   design: ALEXANDRA TSOUKALA

The package contains:

• The luminaire, consisting of 2 parts
• 1 screw and
• 1 lamp.

USER’S AND INSTALLATION INSTRUCTION

Cut the plastic fasteners to free the 2 parts of the luminaire.

1) Lay down with care 2 parts of thelominaire (without damaging the fabric)

2) Connect the 2 cables through the connectors.

3) Connect the steel tubes, inserting the 1st in the 2nd, so that the upper tubo’s slot faces the lower tube’s hole and secure the screw with a suitable screwdriver

4) Raise in the upright position the luminaire.

5) Raise the fabric and place the energy saving lamp (E27 20W) in the lampholder

6) Connect the luminaire’s plug in a main’s socket outlet.

7) Use the floor switch to turn on the luminaire.

Lamp Replacement
1) Unplug the luminaire.

2) Replace the lamp. USE ONLY Energy Saving Lamp E27 20W.

Cleaning

1) Unplug the luminaire.

2) Raise the fabric and unscrew the 2 screws.

3) Remove the screws of the upper part.

4) Remove the chromium plated disc.

5) Remove and wash the fabric by hand, with cold water and soap. Avoid crimping the plastic stitfer
Alternatively dry cleaning

6) After drying follow the reverse procedure to dress the luminaire with the fabric.

Technical Information

• Supply: ‘230V AC 50 Hz, Max 20W
• Protection: IP 20.
• Lamp: Use Energy Saving Lamp E27 20W.
• Fabric: Satin Polyester.

Warning

• THIS LUMINAIRE IS NOT SUITABLE FOR INTERCONNECTION WITH OTHER LUMINAIRES.
• FOR INDOOR USE ONLY
• IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR HIS SERVICE AGENT OR A QUALIFIED PERSON IN ORDER TO AVOID HAZARD.