GEN GENIE Floor Lamp – GEN-G-FL

LUMINAIRE TYPE: GEN-GENIE FLOOR DESIGN: ALEXANDRA TSOUKALA

The package contains: 1) The luminaire, consisting of 3 parts, 2)2 screws M4. (to connect the two parts of the luminaire)
3) 1 screw M10. (to fix the base) 4) 2 fabrics.

USER’S AND INSTALLATION INSTRUCTION
Cut the plastic fasteners to free the 3 parts of the luminaire.

1)Lay down with care the 3 parts of the luminaire.

2) Connect the 2 parts using the 2 screws M4.

3) Fix the base using the screw M10.

4) 1) Connect the 2 cables through the connectors.

Raise in the upright position the luminaire

5) Place 3 energy saving lamps (E27 20W) in the lamp holders.
6) a) Place the fabric, first start with the bottom fabric (see sketch).

b) Next step is to clip the fabric (see sketch).
c) Raise the button hole and fasten it to the button.
d) Continue with the upper fabric.
7) Connect the luminaire’s plug in a main’s socket outlet.
8) Use the floor switch to turn on the luminaire.

Lamp Replacement
1)Unplug the luminaire
2)Replace the lamp.
USE ONLY Energy Saving Lamps E27 20W.

Cleaning
1) Unplug the luminaire.
2) Remove and wash the fabric by hand, with cold water and soap.
Alternatively dry-cleaning.
3) After drying, follow the step 5 procedure to dress the luminaire
with the fabric

Technical Information
Supply:230V AC 50 Hz, Max 3X 20W,
Protection: IP 20
Lamps:Use Energy Saving Lamp E27 20W.
Fabric: Satin Polyester.

Warning
THIS LUMINAIRE IS NOT SUITABLE FOR INTERCONNECTION WITH OTHER LUMINAIRES
FOR INDOOR USE ONLY
IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, THE MANUFACTURER OR HIS SERVICE
AGENT OR A QUALIFIED PERSON SHALL EXCLUSIVELYREPLACE IT IN ORDER TO AVOID HAZARD