CONCHA Floor Lamp – CON-FL

minimum design      design Alexandra Tsoukala

LUMINAIRE TYPE: CONCHA

USER’S AND INSTALLATION INSTRUCTION ONLY BY QUALIFIED PERSON.

The package contains:

1. The luminaire
2. 2 spokes
3. Butterfly nuts
4. Plastic rings
5. Screw

Cut the plastic fasteners to free the luminaire

Stretch the fabric to place it on the spokes and fix it with the plastic rings.

Cleaning

1. Switch of the luminaire.
2. Remove the plastic rings at the end of the spokes
   in order to lift the fabric.
3. Remove the 6 spokes.
4. Loosen the hexagonal nut on the top of the luminaire
   and lift the chromium-plated disk so you can remove
   the fabric.
5. Wash the fabric by hand, with cold water and soap. Alternatively dry cleaning,
6. After drying, follow the reverse procedure to dress the luminaire with the fabric.

Technical Information

• Supply: 230V AC 50 Hz, Max 20W.
• Protection: IP 20.
• Lamp: Use Energy Saving Lamp E27 20W.
• Fabric: Satin Polyester.

Lamp Replacement

1. Switch of the luminaire
2. Replace the lamp
   USE ONLY Energy Saving Lamp E27 20W.

Warning

• THIS LUMINAIRE IS NOT SUITABLE FOR INTERCONNECTION WITH OTHER LUMINAIRES.
• FOR INDOOR USE ONLY
• IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLU-SIVELY REPLACED BY THE MANUFACTURER OR HIS SERVICE AGENT OR A QUALIFIED PERSON IN ORDER TO AVOID HAZARD.